| ▼Nmgx | This namespace contains all the API of MorphoGraphX |
| ►Ngraph | |
| C_EmptyEdgeContent | Contains all the classes related to the graphs |
| CArc | Type of a undirected edge (or arc) |
| CEdge | Edge of a vv graph |
| ►CVertex | Vertex of a vv graph |
| CCountedContent | Type of the reference counted content |
| ►CVVGraph | Class representing a VV graph |
| Cneighbor_t | Structure maintaining the data for a single neighbor |
| CNeighborhoodPair | |
| Csearch_result_t | Type of the result of the search for a vertex in a neighborhood |
| Csingle_neighborhood_t | Type of the neighborhood of a vertex |
| CWeakVertex | |
| ►Ngui | |
| CEditMarkersDlg | |
| CFileListWidget | |
| CMarkerColorDelegate | |
| CProcessDocsDialog | |
| CQTransferFunctionViewer | |
| CTransferFunctionDlg | |
| CTransferMarkerModel | |
| ►NInformation | |
| CEvent | |
| ►Nprocess | |
| CAdaptiveSubdivideBorderMesh | Subdivide triangles around cell borders |
| CAdaptiveSubdivideSignalMesh | Subdivide triangles depending on mesh signal |
| CAlignCanvas | Align two stacks' canvas |
| CAnnihilate | Delete all but a layour of the stack just "below" the mesh |
| CApplyKernelStack | Apply a user-defined convolution kernel to the current image |
| CApplyMaskLabels | Apply a mask to labels |
| CApplyMaskToStack | Apply a mask to a grey-level image |
| CApplyTransferFunction | Transform the stack to reflect the transfer function in use |
| CAutoScaleStack | Scale the stack intensity to fill exactly the whole range |
| CAutoTrim | Trim stack boundary box (BBox) to keep only non-empty part |
| CAverageStack | Compute the local average of each voxel of the stack |
| CBaseProcessDefinition | Definition of a process, without the process factory |
| CBinarizeStack | Binarize the stack: set the intensity of any voxel greater than the threshold to 65535 and all other voxels to 0 |
| CBlobDetect | Find and label blobs in an image |
| CBrightenStack | Change the global luminosity of the stack |
| CChangeVoxelSize | Change the size of the stack's voxel, without changing the data itself |
| CCImgGaussianBlurStack | CImg implementation of the gaussian blur |
| CCImgLaplaceStack | Compute the Laplacian of the stack (using CImg) |
| CClearCellAxis | |
| CClearMainStack | Erase the content of the main stack |
| CClearMeshSignal | Clear the mesh signal to a defined value |
| CClearWorkStack | Erase the content of the work stack |
| CClipStack | Apply the active clipping planes to the current stack |
| CCloseStackLabel | Close a labeled stack |
| CClosingStack | Close the gray-level stack using a cubic kernel |
| CColorGradient | Compute the gradient of the image in the Z axis of the image |
| CCombineStacks | Combine the values of the main and work store onto the work store |
| ►CComputeHeatMap | Compute heat map on the current mesh |
| CImageHeatMaps | |
| CComputeVolume | Compute the volume of each label and write the result in a CSV file |
| CConsolidateRegions | Try to merge segmented regions based on their contact area and the total voxel intensity at their boundary |
| CConsolidateRegionsNormalized | Variation on the ConsolidateRegions process |
| CCopyMainToWork | Copy the content of the main stack into the work stack |
| CCopyParentsToLabels | Copy parents to labels, and clear parent table |
| CCopySwapStacks | Copy or swap stacks between stack 1 and 2 |
| CCopyWorkToMain | Copy the content of the work stack into the main stack |
| CCorrectParents | Take out non-existing labels from parent map |
| CCorrespondanceJunctions | |
| CCuttingSurfMesh | Create a surface matching the current cutting surface, whether it's a plane or a Bezier surface |
| CDeleteEdge | Delete the edge between 2 selected vertices |
| CDeleteHeatRangeLabels | Delete labeling, and possibly cells, if their heat falls within a defined range |
| CDilateStack | Dilate the gray-level stack using a cubic kernel |
| CDisplayFibrilOrientations | Change the representation of the fibril orientation after it has been computed |
| CDisplayPDGs | |
| CDisplayTissueCurvature | Once the curvature tensor has been computed, this process allows to change how it is displayed |
| CEdgeDetectProcess | TODO: This class needs documenting! |
| CEraseAtBorderStack | Erase any label touching the border of the image |
| CErodeStack | Erode the gray-level stack using a cubic kernel |
| CExtendByConnectivity | Extend the current selection to all vertices that are connected to a currently selected vertex |
| CFibrilOrientations | Compute principle orientations of lines in the mesh signal |
| CFillHolesProcess | |
| CFillLabelStack | Replace one label by another one on the stack |
| CFillStack3D | Fill the stack with labels from a labeled 3D mesh |
| CFillStackToMesh | Fill the volume contained by a closed mesh with a pre-defined intensity |
| CFilterStack | Clip the intensity of the stack to the interval [Low Threshold, High Threshold] |
| CFixMeshCorners | Fix labelling of cell corners |
| CGaussianBlurStack | Blur the stack using a Gaussian kernel or specified radius |
| CGlobalProcess | Global processes have full mutable access to all properties of the process |
| CGrabLabelsSegment | Grab labels from other mesh (3D meshes) |
| CGrowthDirections | |
| CHeatMapDaughterCells | Compute the heap map that shows how many daughter cells a parent cell has |
| CHideCellAxis | Hide the cell axis on the mesh |
| CInvertStack | Invert the intensity of all voxels in the stack |
| CJoinRegionsSegment | Join regions, using both the segmented stack and the extracted 3D cell mesh |
| CLabelSelected | Change the label of the selected vertices |
| CLoadAllData | Load all the files as specified in the various objects (filenames) |
| CLoadCellAxis | |
| CLoadHeatMap | Load the heat map from a CSV file |
| CLoadParents | Load mapping from each label to a label in a different mesh (parent) |
| CLoadTransform | Load the frame (or transform) matrix from a file containing a list of values in column-major |
| CLoadViewFile | Load a view file and all the associated files |
| CLocalMaximaStack | Find the local maxima of the current image |
| CLoopSubdivisionMesh | Subdivide the mesh uniformly using Loop subdivision |
| CMakeCellMesh | Convert a segmented mesh into a 2D cellular mesh |
| CMarchingCube3D | |
| CMarchingCubeSurface | Find the surface of a volume defined by an iso-surface on the image intensity using a variation on the Marching Cube method |
| CMergeStacks | Merge the main store of the current stack with the current store of the other one |
| CMergeVertices | Merge selected vertices into one |
| CMeshAutoSegment | Auto-Segmentation of the mesh surface based on signal |
| CMeshBrightness | |
| CMeshClosing | Morphological closing on the mesh |
| CMeshCombineRegions | Combine over-segmented regions, based on mesh signal |
| CMeshDeleteSelection | Delete vertices selected in the current mesh, preserving cells |
| CMeshDeleteValence | Delete vertices whose valence is wihin a given range |
| CMeshDiffGaussians | Calculate a difference of Gaussians on mesh |
| CMeshDilation | Morphological dilation on the mesh, using a spherical kernel |
| CMeshDilationOp | |
| CMeshErosion | Morphological erosion on the mesh, using a spherical kernel |
| CMeshErosionOp | |
| CMeshExport | Export a mesh on various formats: PLY format, VTK format, "text" format, "cells" format, MeshEdit format, STL format or OBJ format |
| CMeshGaussianBlur | Smooth the mesh signal using a gaussian kernel |
| CMeshGaussianBlurOp | |
| CMeshImport | Import a mesh from a file of another format |
| CMeshInvertSelection | Invert the selection status of all the vertices in the current mesh |
| CMeshKeepVertices | Mark vertices so that they can survive as lines and points |
| CMeshLoad | Load a MGXM mesh file |
| CMeshLocalMinima | Find the local minima in the current mesh |
| CMeshLocalMinimaOp | |
| CMeshNormalize | MeshNormalize MeshProcessSignal.hpp <MeshProcessSignal.hpp> |
| CMeshNormalizeOp | |
| CMeshOpening | Morphological opening on the mesh |
| CMeshProcess | Mesh processes have mutable access to meshes and non-mutable access to stacks |
| CMeshRelabel | Relabel a segmented mesh |
| CMeshSave | Save a mesh into a INRIA or MGXM file |
| CMeshSelectAll | Select all the vertices in the current mesh |
| CMeshSelectBadNormals | Select all the vertices with invalid normals in the current mesh |
| CMeshSelectClip | Select all vertices within the clipped region |
| CMeshSelectDuplicateCells | Select vertices if the region with their label is not contiguous (e.g |
| CMeshSelectLabel | |
| CMeshSelectLabeled | Select all labeled vertices in the current mesh |
| CMeshSelectUnlabeled | Select all the unlabel vertices of the current mesh |
| CMeshSelectWholeLabelExtend | Extent the current selection so each label having at least one vertex selected will be fully selected |
| CMeshUnselect | Ensure no vertex is selected in the current mesh |
| CMeshUnselectLabel | Unselect all the vertices having a given label |
| Cmgx_Factory | |
| Cmgx_Factory_Python | |
| Cmgx_Process | |
| Cmgx_Process_Python | |
| CNormalizeStack | Normalize the intensity of the stack |
| COpeningStack | Open the gray-level stack using a cubic kernel |
| COpenStackLabel | Open a labeled stack |
| CPCAnalysis | Perform a PCA on each labeled regions of the segmented stack, and create shapes in the mesh reflecting the main components |
| ►CProcess | This is the main process class, the one all process inherit from |
| ►CCheckState | Class that construct a state check on the current process |
| CProcessReqs | |
| CProcessDefinition | Definition of a process, including the process factory |
| CProjectCurvature | Set the mesh signal to be the curvature of the mesh |
| CProjectCurvatureOp | |
| CProjectSignal | Project stack signal onto the current mesh |
| CPythonProcess | This process evaluate a Python script from which other processes can be called |
| CRelabelCells3D | Relabel 3D cells |
| CRescaleHeatMap | Rescale the heat map, specifying new lower and upper bound |
| CRescaleSignal | |
| CResetMeshProcess | Reset a mesh |
| CResetParents | Clear label to parent mapping |
| CResizeCanvas | Resize the stack to add or remove voxels |
| CReverseMesh | Reverse the orientation of the mesh |
| CReverseStack | Reverse the direction of the selected axes |
| CSaveCellAxis | |
| CSaveGlobalTransform | Save the transformation from stack 1 to stack 2 in a file |
| CSaveHeatMap | Save the current heat map in a CSV file |
| CSaveParents | Store mapping from each label to a label in a different mesh (parent) |
| CSaveTransform | Save the frame (or transform) matrix to a file, as a list of values in column-major |
| CSaveViewFile | Save the view file |
| CScaleMesh | Scale the mesh |
| CScaleStack | Scale the stack |
| CSegmentClear | Remove any segmentation from the current mesh |
| CSegmentMesh | Segment the mesh using a seeded watershed algorithm |
| CSetCurrentStack | Set the current stack and store |
| CSetSignalProcess | Set the signal to a given value for all currently active vertices |
| CSharpenStack | Apply an "unsharp" filter to the stack |
| CShiftStack | Shift main and work stores within the canvas (e.g |
| CShrinkMesh | Displace each vertex towards the mesh center, perpendicular to the surface |
| CSmoothMesh | Average each vertex position based on its neighbors |
| CSmoothMeshSignal | Smooth the mesh signal using local averaging |
| CStackExport | Export the stack data into a stack of images |
| CStackImport | Import images forming a stack |
| CStackMeshProcess | Base class for a process that either fill or erase the inside part of a mesh in a stack |
| CStackOpen | Open a stack in either the MGXS or INRIA formats |
| CStackProcess | Stack processes have non-mutable access to meshes and mutable access to stacks |
| CStackRelabel | Relabel a 3D stack to use consecutive labels |
| CStackRelabelFromMesh | Change the labels of a stack to match the ones of a labeled 3D cell mesh |
| CStackSave | Save the data into a MGXS or INRIA format |
| CStackSwapBytes | Process that swap bytes |
| CSubdivideBisectMesh | Subdivide triangles area with bisection |
| CSubdivideMesh | Subdivide the mesh uniformely, without displacing existing vertices |
| CSwapStacks | Swap the main and work stores of a stack |
| CTakeSnapshot | This process allows scripts and other processes to take snapshots of the current result |
| CThresholdLabelDelete | Delete labels that have too few or too many voxels |
| CTissueCurvature | Compute the curvature tensor for each cell of a cell mesh |
| CTransformMesh | Apply an affine transformation to the vertices of a mesh (all of them or just the selected ones) |
| CTrimStackProcess | Set to 0 any voxel not contained within the closed mesh |
| CUserCancelException | Exception launched when a user clicks the Cancel button |
| CViewMeshProcess | This process is used to change how the mesh is seen |
| CWatershedStack | Compute the seeded watershed of the current stack using the CImg library |
| ►Nutil | |
| CAnisotropyCurvature | |
| CAverageCurvature | |
| CBaseIterator | |
| CBoundingBox | |
| CCircIterator | Creates a circular iterator from a range of forward iterators |
| CColor | A utility class to encapsulate color data |
| CCurvature | |
| CCurvatureMeasure | |
| CFunction | A utility class for functions |
| CGaussianCurvature | |
| CImplicitFunction | |
| CInsert | Insert a new vertex on an edge |
| CInsert< vvgraph, false > | |
| CInsert< vvgraph, true > | |
| CMatrix | Class representing a fixed-size matrix |
| CMaximalCurvature | |
| CMinimalCurvature | |
| Cmultiset_vector | Implementation of a multiset using a sorted vector as container |
| CParms | A utility class to parse L-Studio like parameter files |
| ►CPlyFile | Class representing the content of a PLY file |
| CElement | Class representing an element |
| CProperty | Class representing a property in an element |
| CPolygonizer | |
| CQuaternion | Implements the quaternion operations |
| Crefpair | Class used to hold references for the util::tie() function |
| Cremove_pointer | |
| Cremove_pointer< T * > | |
| CRootSumSquareCurvature | |
| CSelectMemberIterator | Iterate over a container of structure, dereferencing only a member of it |
| CSelectMemberPointerIterator | |
| Cset_vector | Implementation of a set using a sorted vector as container |
| CSignedAverageAbsCurvature | |
| Cstatic_assert_test | |
| CSTATIC_ASSERTION_FAILURE | |
| CSTATIC_ASSERTION_FAILURE< true > | |
| CSumSquareCurvature | |
| CSymmetricTensor | |
| CVector | Namespace containing all the utility classes |
| CClip | |
| CClipRegion | Class to handle rotatable pair of clipping planes |
| CColorbar | |
| CColors | |
| CCutSurf | |
| CCuttingSurface | |
| CEdgeData | This class defines the fields available from an edge |
| CGlobalProgress | |
| CGLSLValue | |
| CImage3D | |
| CImgData | |
| CMesh | This class holds the actual mesh as a VV Graph and all sort of properties for it, including visualization ones |
| CProcessSystemCommand | |
| CProcessThread | |
| CProcessUpdateViewEvent | |
| CProgress | |
| CScaleBar | |
| CShader | |
| CStack | Represent the dimensions of the 3D data, and the frames transformations |
| CStore | Holds the actual 3D data and properties specific to it |
| CTransferFunction | Class defining a transfer function as linear interpolation between set values |
| CUpdateImgDataEvent | |
| CVertexData | This class defines the content of a vertex |
| ▼Nstd | STL namespace |
| ►Ntr1 | |
| Chash< mgx::graph::Edge< EdgeContent > > | |
| Chash< mgx::graph::Vertex< VertexContent, Alloc > > | |
| Chash< mgx::graph::WeakVertex< VertexContent, Alloc > > | |
| Chash< mgx::util::Vector< dim, T > > | |
| Chash< std::pair< T1, T2 > > | |
| CBrightenMesh | Change the brightness of the signal |
| ▼CCameraPath | |
| CAction | |
| CRotation | |
| CToPosition | |
| CColorEditorDlg | |
| CDebugDlg | |
| CFreeFloatDelegate | |
| CLabelEditorDlg | |
| CLabelModel | |
| CLibrary | |
| CMGXCamera | |
| CMGXCameraFrame | |
| CMGXKeyFrameInterpolator | |
| CMorphoGraphX | |
| CMorphoViewer | |
| CPathEditorDlg | |
| CPathEditorModel | |
| CProcessParmsModel | |
| CQTransferFunctionViewer | |
| CResetableSlider | |
| CTaskEditDlg | |
| CTasksModel | |
| CTasksView | |
| CTypedProcessDefinition | |